Looking for help?

Find answers to your questions

Adjust the Handlebar

Table of Contents

  1. Tools Needed
    1. 5mm Allen Wrench
  2. Adjust the Handlebar Angel
    1. 1. Loosen the four fixed bolts of the stem.
    2. 2. Adjust the angle.
    3. 3. Re-tighten the 4 bolts.
  3. Adjust the Handlebar Height
Finding the proper height and angle for your e-bike handlebar can significantly improve your biking adventures. It is essential to remember that there is no definitive "correct" or "incorrect" method to adjust the handlebars on your e-bike as you go through this procedure. Instead, focus on your comfort!
 

Tools Needed

5mm Allen Wrench

1280X1280.PNG

Adjust the Handlebar Angel

1. Loosen the four fixed bolts of the stem.

2. Adjust the angle.

Rotate the handlebars forward or backward to your desired position.

Note:
This will only slightly alter the height of the handlebar, but this will adjust its forward or backward angle.

3. Re-tighten the 4 bolts.

Retighten them according to the order shown below 1-3-2-4 (X-pattern). Recommended torque: 2-3N/m.
 
44.png
 

Adjust the Handlebar Height

 
Please NOTE that t the handlebar height of the Lynx is not adjustable, and the position of the headset is also non-adjustable.
 
The headset/stem height is fixed during design. The spacers located below the stem must remain below the stem. Recklessly changing the stem position by adding spacers underneath will result in the inability to securely tighten the stem on the fork's steerer tube.

Updated on 18 Oct 2023