Looking for help?

Find answers to your questions

Skyhopper brake wire and basket installation

1. Loosen the fixing screw of the front brake cable wire and pull out the cable cap
 
image1.jpeg
 
2.Remove the brake wire from the frame
 
image2.jpeg
 
3.Remove the brake wire from the gap in the brake handle and replace the brake wire
 
image3 (1).jpeg
4.Install the new brake wire back on the brake handle
 
image4.jpeg
 
5.Thread the brake line tube back through the front fork buckle
 
image5.jpeg
 
  1. Install the brake wire tube back on the brake
image6.jpeg
7. After installing the brake wire, adjust the brake clearance, and put the tail of the wire over, and use needle-nose pliers to fix the tail cap
 
image7.jpeg
8.Remove the basket fixing screws from the front of the frame
image8.jpeg
9.Separate the main line from the brake line left and right, align the basket fixing holes with the frame fixing holes, and screw the fixing screws on.
 
image9.jpeg
 
10.Lock 4 fasteners (torque 12-15N/m)
 
image10.jpeg

Updated on 19 Oct 2023